Menu Close

Category: emmc event

EMMC Expert Meeting on the Status and Perspectives of the Software for Materials Modelling Forum


The European Materials Modelling Council (EMMC, www.emmc.info) is organizing an online workshop

“EMMC Expert Meeting on the Status and Perspectives of the Software for Materials Modelling Forum”

 on June 24, 2019 from 10:00 to 12:30 CEST


Main Objectives

The main objective of the workshop is to collect experts’ perspective on issues and challenges in creating online community forums
and to collect feedback on the newly opened LinkedIn group https://www.linkedin.com/groups/8684365/.

More information on the event page!

Contact

If you would like to participate in the discussion and share your opinion,
please contact Davide Di Stefano https://www.linkedin.com/in/davidedistefano/

Support

This event has received funding via the EMMC-CSA Project
from the European Union’s Horizon 2020
Research and Innovation Programme under Grant Agreement No 72386

EMMC Expert Group Meeting on Strategies for large companies and SMEs to engage in materials modelling

Date/Time

May 16, 2019, 10.00 am – 5.00 pm

Venue

Drayton Room, Royal Geographical Society, 1 Kensington Gore, London, SW7 2AR

Outline

People, tool, process and data can be seen as the four pillars of a successful deployment of materials modelling in the industrial community. During this meeting, we would like to develop strategies with leading modelling experts in industry through discussions. 

More ….. on the event page

Organisation & Contact

This is an “invitation-only” event; invited experts will be contacted by the organizers.
Please do not book travel and accommodation before you have been awarded a place on this workshop in writing.

Workshop organisation: Gerhard Goldbeck (Goldbeck Consulting)

Support


This event has received funding via the EMMC-CSA project
from the European Union‘s Horizon 2020 research and innovation programme
under Grant Agreement No 723867

EMMC-CSA Webinar – Introductions to Ontology and Interoperability – Presentations available now!!

 

Please find the presentations of the EMMC-CSA Webinar given by Dr. Alexandra Simperler ( Goldbeck consulting) on the eventpage!

Presentations

Contact

In case you have any questions regarding the webinar please don’t hesitate to contact Dr. Simperler. (email: alex@goldbeck-consulting.com)

Funding

The organisation of the webinar was supported
by the funded EU project EMMC-CSA, Grant Agreement No. 723867.

EMMC Expert Meeting on Business Aspects of Digital Marketplaces

 

EMMC-CSA partner FRAUNHOFER is organising an expert meeting on business aspects of materials modelling marketplaces on May 6-7, at EPFL, Lausanne, CH.

Objective

The objective of the meeting is to bring together experts to exchange ideas and explore potential business models for sustainable operations of online European digital marketplace platforms. These platforms act as Digitalisation Innovation Hubs for next generation materials development and combine services for materials modelling, translation, education, software, data repositories and hardware (e.g., access to HPC backends).

More details is available on the event page.

Organisation & Contact

This is an “Invitation-only” event. You will be contacted by the organisers. 

For further information please contact Adham Hashibon (Fraunhofer IWM)  & Welchy Leite Cavalcanti (Fraunhofer IFAM) 

This event is co-organised by EPFL.

               

 

Funding

This event has received funding via the EMMC-CSA Project
from the European Union’s Horizon 2020
Research and Innovation Programme under Grant Agreement No 72386

EMMC workshop on Physics-based vs data-driven models

 

The EMMC workshop on “physics-based vs data-driven models”
was run inside the conference

“Multi-scale modelling (Coupling and linking) of materials and
molecules in the 21st century: Physics-based or data-driven?”

June 11-13, 2018 at the Ångström Laboratory of Uppsala University, Uppsala, Sweden

 

 

Report on the EMMC Workshop

thumbnail of EMMC-CSA-D1.6_M23_vfinal-PU-WEB

The conference had the purpose to bring together two scientific communities: the more traditional modelers using and developing physics-based methods and models and those applying and creating data-based informatics models now more and more rapidly entering into materials modelling. As they represent two different schools but still solving similar problems it created continuous debate on the pros and cons of both methods but also an agreement that they will both develop together and complement each other, especially, when more and more reliable data appear and become accessible to the community. The current status of data was a frequently touched topic; should all data be open to everybody or not? How should it be organized? Do we need ontologies? Also an open EMMC session was included to discuss this current report for the European Commission.

As far as we are aware, this was the first meeting of its kind anywhere, i.e. a meeting with exactly this focus. The interest from industry was significant with participation from DCS Computing, DSM (a Dutch multinational company in the fields of health, nutrition and materials), Goodyear Dunlop Tires Operations SA (Luxembourg), Virtual Lab (Korea), Granta design (UK), Materials Design S.A.R.L (France), Solvay S.A. (big chemical company, France), Swerea KIMAB AB, Unilever Research, ACCESS e.V., Dow Benelux B.V., Noruna AB. Still on the non-academic side, the following industry-active institutes were represented: Teknova AS (Norway), Korea Institute of Energy Research (KIER), Korea Institute of Science and Technology (KIST), Helmholtz-Zentrum Geestacht and more. There were over a hundred participants from 16 countries. The audience was composed of junior and senior experts in academia and in industry as well as software developers and translators. Specialised presentations as well as expert-talks of a more tutorial character were included. Every scientific session ended with a summary of the highlights raised by speakers and audience collected by the chair-persons.

More information on the Conference and Workshop you will find on the event page!

Contact

Prof. Kersti Hermansson  –  go here

Support & Funding

This event has received funding via the EMMC-CSA Project from the European Union’s Horizon 2020
Research and Innovation Programme under Grant Agreement No 723867

and is arranged in co-operation with:  CECAM-Sweden

EMMC-CSA Workshop on Industrial impact of materials modelling – achievements and perspectives

 

The EMMC-CSA partner, POLITO is organising a Workshop on “Industrial impact of materials modelling – achievements and perspectives”

on July 8-10, 2019, at Sala Teatro, SiTI (Istituto Superiore sui Sistemi Territoriali), Turin, Italy


For detailed information on schedule, accommodation … please visit the event page!


Workshop objectives

The objective of this meeting is therefore to gather a consistent number of experts from the different stakeholders interested in materials adoption/development, and provide a discussion platform for industrial requirements as compared to state-of the-art modelling techniques. The ambition of the workshop is to cover the more relevant aspects which are critical to the widespread adoption of materials modelling techniques in industry. To this, six thematic sessions are organized and will cover:

  1. state-of-the-art modelling techniques and guidelines for further model developments;
  2. the perspective of the European software owners/developers;
  3. the economic impact of materials modelling on industrial innovation;
  4. strategies for improving the two-way transfer of knowledge between academia and industry – i.e. Translators and their training requirements;
  5. interoperability requirements and frameworks – e.g. ontologies – for integration of models and software. Finally, a special session will be dedicated to the discussion of the potential of artificial intelligence in the framework of materials modelling, with particular emphasis on the benefit for high-throughput simulations, big data and their mining – e.g. data-driven modelling – towards Industry 4.0.

Organisation, Contact & Support

This is an “Invitation-only” event. You will be contacted by the organisers. After you have confirmed your participation you will receive the registration link.

Pietro Asinari, Luca Bergamesco (Politecnico di Torini, Italy).

    

This event has received funding via the EMMC-CSA Project
from the European Union’s Horizon 2020
Research and Innovation Programme under Grant Agreement No 72386

EMMC Expert Meeting on Training requirements for Translators – PRESENTATIONS AVAILABLE

 

The output of the meeting would be used to outline the types of needed translators trainings including the required training material and

for the preparation of the rule for Trainers as well as to update the Guide for Translators of EMMC.

For PRESENTATIONS and more information please visit the event page.

 

Support

This event has received funding via the EMMC-CSA Project
from the European Union’s Horizon 2020
Research and Innovation Programme under Grant Agreement No 72386

EMMC Workshop on Business Models for Materials Modelling Software

 

Are you interested in software commercialisation and business models relevant to the field of materials modelling? EMMC would be pleased to invite you to a workshop where you can learn from a range of experts.

Experienced Software Owners will share their successful practice with the audience and will cover open-source, non-profit and commercial business models.

The workshop is aimed in particular at PostDocs, academic research and industrial R&D group leaders or advanced PhD students who actively work on materials modelling software and codes and are looking into business models. The workshop will be a collaborative event. We expect active interactions between impulse speakers, trainers and motivated participants. Hence, we would like to invite everyone who has interest to express their experience and aim to participate and to apply for one of the 50 available places.

More details on schedule and application can be found on the event page!!

Organisation

Alexandra Simperler  alex@goldbeck-consulting.com

         

Event Funding

This event has received funding via the EMMC-CSA project
from the European Union‘s Horizon 2020 research and innovation programme
under Grant Agreement No 723867

REPORT on EMMC Expert Meeting on Open source, free software and commercially supported software for materials modelling

One of the main objectives of the EMMC was increasing the use of materials modelling software in the European industry. This EMMC Expert meeting served to bring together leading European software developers and stakeholders. Further information on the event page …

A report is available now:

thumbnail of EMMC-CSA-WP5-ExpertParis-PU-V1-WEB

Organisers

Kurt Stokbro (Synopsys, Denmark), Volker Eyert & Erich Wimmer (MDS, France)

       and  

Event Funding

This event has received funding via the EMMC-CSA project
from the European Union‘s Horizon 2020 research and innovation programme
under Grant Agreement No 723867